From Secure Computing Wiki
Revision as of 17:34, 26 November 2010 by Ecrist (Reverted edits by Exyhypele (talk) to last revision by 188.8.131.52)
This page should hold links to Cisco specific configurations and commands.
Block IPv6 Between VLANs on Cisco Switches
- create mac ACL to block ethertype 86DD
- apply to interface ingress
- with SNMP write enabled on the router or switch, the following command will send a copy of the running configuration to the specified TFTP server:
snmpset -t 5 -v 1 -c PRIVATE HOST .184.108.40.206.220.127.116.11.1.55.W.X.Y.Z s FILENAME
Replace the following in the above command:
- PRIVATE: the SNMP private key for write access
- HOST: the hostname/address for the router or switch
- W.X.Y.Z: The IP address of the TFTP server. If the IP is 192.168.1.5, it would appear as .18.104.22.168.22.214.171.124.126.96.36.199.1.5
- FILENAME: The filename to save on the TFTP server.
- escape sequence: The Cisco escape sequence mentioned in commands such as traceroute and ping is, by default, Control-^ (control+shift+6).