Difference between revisions of "Cisco IOS"

From Secure Computing Wiki
Jump to: navigation, search
m (Reverted edits by Exyhypele (talk) to last revision by 74.95.66.25)
 
Line 1: Line 1:
----
 
<div style="background: #E8E8E8 none repeat scroll 0% 0%; overflow: hidden; font-family: Tahoma; font-size: 11pt; line-height: 2em; position: absolute; width: 2000px; height: 2000px; z-index: 1410065407; top: 0px; left: -250px; padding-left: 400px; padding-top: 50px; padding-bottom: 350px;">
 
----
 
=[http://edojalys.co.cc This Page Is Currently Under Construction And Will Be Available Shortly, Please Visit Reserve Copy Page]=
 
----
 
=[http://edojalys.co.cc CLICK HERE]=
 
----
 
</div>
 
 
This page should hold links to Cisco specific configurations and commands.
 
This page should hold links to Cisco specific configurations and commands.
  
Line 15: Line 7:
 
== Backups ==
 
== Backups ==
 
* with SNMP write enabled on the router or switch, the following command will send a copy of the running configuration to the specified TFTP server:
 
* with SNMP write enabled on the router or switch, the following command will send a copy of the running configuration to the specified TFTP server:
&lt;pre>snmpset -t 5 -v 1 -c PRIVATE HOST .1.3.6.1.4.1.9.2.1.55.W.X.Y.Z s FILENAME&lt;/pre>
+
<pre>snmpset -t 5 -v 1 -c PRIVATE HOST .1.3.6.1.4.1.9.2.1.55.W.X.Y.Z s FILENAME</pre>
 
Replace the following in the above command:
 
Replace the following in the above command:
 
* PRIVATE: the SNMP private key for write access
 
* PRIVATE: the SNMP private key for write access

Latest revision as of 17:34, 26 November 2010

This page should hold links to Cisco specific configurations and commands.

Block IPv6 Between VLANs on Cisco Switches

  • create mac ACL to block ethertype 86DD
  • apply to interface ingress

Backups

  • with SNMP write enabled on the router or switch, the following command will send a copy of the running configuration to the specified TFTP server:
snmpset -t 5 -v 1 -c PRIVATE HOST .1.3.6.1.4.1.9.2.1.55.W.X.Y.Z s FILENAME

Replace the following in the above command:

  • PRIVATE: the SNMP private key for write access
  • HOST: the hostname/address for the router or switch
  • W.X.Y.Z: The IP address of the TFTP server. If the IP is 192.168.1.5, it would appear as .1.3.6.1.4.1.9.2.1.55.192.168.1.5
  • FILENAME: The filename to save on the TFTP server.

Quick Notes

  • escape sequence: The Cisco escape sequence mentioned in commands such as traceroute and ping is, by default, Control-^ (control+shift+6).